Oil-bleeding Silicone Rubber

Oil-bleeding Silicone Rubber
Inquiry
Applications

Due to its characteristics of fast oil bleeding after vulcanization with an appropriate amount, this oil-bleeding silicone rubber is widely applied for the production of automotive parts, bearing seals and other rubber products requiring excellent self-lubricating properties.

Features
  • Excellent self-lubricating properties;
  • Superior physical properties;
  • Good processability;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa

Technical Data
  • Model: HT-8130MY
  • Appearance: Translucent
  • Processability: 200-200
  • Hardness (Shore A): 30
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 7
  • Elongation (%): 850
  • Tear strength (K N/m): 15
  • Model: HT-8140MY
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 750
  • Tear strength (K N/m): 20
  • Model: HT-8150MY
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT-8160MY
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 7
  • Elongation (%): 550
  • Tear strength (K N/m): 15
  • Model: HT-8170MY
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 450
  • Tear strength (K N/m): 15
  • Model: HT-8180MY
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 300
  • Tear strength (K N/m): 15
Other Products