• 
Dongguan Zhengtai Organic Silicon Technology Co., Ltd.
  • Home
  • About Us
  • Products+
    • General Precipitated Silicone Rubber for Molding
    • High Resilience Precipitated Silicone Rubber for Molding
    • Non-Post Cure Silicone Rubber
    • Fumed Silicone Rubber
    • General Silicone Rubber for Extrusion
    • Silicone Rubber for Special Purpose
    • Fumed Liquid Silicone Rubber
    • Precipitated Liquid Silicone Rubber
  • Applications+
    • Industrial
    • Healthcare
    • Automotive
    • Daily Supplies
  • Contact Us
  • Home
  • Products
  • General Precipitated Silicone Rubber for Molding
  • Highly Transparent Silicone Rubber for Molding

Highly Transparent Silicone Rubber for Molding

Highly Transparent Silicone Rubber for Molding
Inquiry
Applications

This transparent silicone rubber is suitable for molding of a variety of products such as sheaths, wallets, watchbands, jewelries, etc., it is typically suitable for products that have high requirements of transparency.

Features
  • Rapid vulcanization;
  • Easy de-molding;
  • Good tear strength and resilience;
  • Suitable for both manual and mechanical edge finishing;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa

Technical Data
  • Model: HT-8105AT
  • Appearance: Translucent
  • Processability: 50-100
  • Hardness (Shore A): 6
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 5
  • Elongation (%): 700
  • Tear strength (K N/m): 8
  • Model: HT-8110AT
  • Appearance: Translucent
  • Processability: 80-120
  • Hardness (Shore A): 10
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 6
  • Elongation (%): 750
  • Tear strength (K N/m): 12
  • Model: HT-8120AT
  • Appearance: Translucent
  • Processability: 120-150
  • Hardness (Shore A): 20
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT-8130AT
  • Appearance: Translucent
  • Processability: 50-100
  • Hardness (Shore A): 6
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 5
  • Elongation (%): 700
  • Tear strength (K N/m): 8
  • Model: HT-8140AT
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 750
  • Tear strength (K N/m): 40
  • Model: HT-8150AT
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 8
  • Elongation (%): 650
  • Tear strength (K N/m): 50
  • Model: HT-8160AT
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 8
  • Elongation (%): 550
  • Tear strength (K N/m): 50
  • Model: HT-8170AT
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 9
  • Elongation (%): 450
  • Tear strength (K N/m): 50
  • Model: HT-8180AT
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 8
  • Elongation (%): 300
  • Tear strength (K N/m): 40
  • Model: HT-8190AT
  • Appearance: Translucent
  • Processability: 260-290
  • Hardness (Shore A): 90
  • Density (g/cm3): 1.22
  • Tensile strength (Mpa): 8
  • Elongation (%): 200
  • Tear strength (K N/m): 40
Tags
Transparent silicone rubber high consistency rubber heat cured rubber
Other Products
    1. Non-Post Cure Silicone Rubber (Fumed Silica)
    2. Non-Post Cure Silicone Rubber (Fumed Silica)
    1. High Tensile & Transparent Silicone Rubber for Molding (Fumed)
    2. High Tensile & Transparent Silicone Rubber for Molding (Fumed)
    1. Silicone Rubber for Wire and Cable
    2. Silicone Rubber for Wire and Cable
    1. High Temperature HTV Silicone Rubber for Molding (Fumed Silica)
    2. High Temperature HTV Silicone Rubber for Molding (Fumed Silica)
    1. Pouring/Perfusion Fumed LSR
    2. Pouring/Perfusion Fumed LSR
Products
  • General Precipitated Silicone Rubber for Molding
    1. General Purpose Silicone Rubber for Molding
    2. Silicone Rubber with High Tensile Strength
    3. Transparent Silicone Rubber for Molding
    4. Highly Transparent Silicone Rubber for Molding
  • High Resilience Precipitated Silicone Rubber for Molding
  • Non-Post Cure Silicone Rubber
  • Fumed Silicone Rubber
  • General Silicone Rubber for Extrusion
  • Silicone Rubber for Special Purpose
  • Fumed Liquid Silicone Rubber
  • Precipitated Liquid Silicone Rubber
Inquiry

You can contact us for a quotation or with any questions you may have on this product.

Click here
Products
  • General Precipitated Silicone Rubber for Molding
  • High Resilience Precipitated Silicone Rubber for Molding
  • Non-Post Cure Silicone Rubber
  • Fumed Silicone Rubber
  • General Silicone Rubber for Extrusion
  • Silicone Rubber for Special Purpose
  • Fumed Liquid Silicone Rubber
  • Precipitated Liquid Silicone Rubber
Contact
No. 3, Nanmen Avenue, Nanmen Industrial Zone, Qiaoli Village, Changping Town, Dongguan City
Ms. Liu
<
Send an Inquiry

You can contact us for a quotation or with any questions you may have on this product.

Click here
Review
Supported by ETW International Inc. USA