High Temperature HTV Silicone Rubber for Molding (Fumed Silica)

High Temperature HTV Silicone Rubber for Molding (Fumed Silica)
Inquiry
Applications

This HTV silicone rubber is suited to produce various types of O-rings, washers, gaskets and other products that require outstanding resistance to high temperature.

  • Applications
Features
  • Rapid vulcanization;
  • Easy de-molding;
  • Good resilience;
  • Long-lasting high temperature resistant;
  • EU standards compliant;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, LFGB, PAHS, PFOA, CPSIA, siloxane testing, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa

Technical Data
  • Model: HT-9930Y
  • Appearance: Translucent
  • Processability: 200-200
  • Hardness (Shore A): 30
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 7
  • Elongation (%): 850
  • Tear strength (K N/m): 15
  • Model: HT-9940Y
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 750
  • Tear strength (K N/m): 20
  • Model: HT-9950Y
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT9960Y
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 7
  • Elongation (%): 550
  • Tear strength (K N/m): 15
  • Model: HT-9970Y
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • 1ensity (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 450
  • Tear strength (K N/m): 15
  • Model: HT-9980Y
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 300
  • Tear strength (K N/m): 15
Other Products