Transparent Silicone Rubber for Molding

Transparent Silicone Rubber for Molding
Inquiry
Applications

This high consistency silicone rubber is a transparent silicone molding rubber suited to produce various types of sheaths, wallets, watchbands, jewelries, etc., it is typically suitable for products that have high requirements of transparency.

Features
  • Rapid vulcanization;
  • Easy de-molding;
  • Good tear strength and resilience;
  • Suitable for both manual and mechanical edge finishing;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa

Technical Data
  • Model: HT-8105T
  • Appearance: Translucent
  • Processability: 50-100
  • Hardness (Shore A): 6
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 5
  • Elongation (%): 700
  • Tear strength (K N/m): 8
  • Model: HT-8110T
  • Appearance: Translucent
  • Processability: 80-120
  • Hardness (Shore A): 10
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 6
  • Elongation (%): 750
  • Tear strength (K N/m): 12
  • Model: HT-8120T
  • Appearance: Translucent
  • Processability: 120-150
  • Hardness (Shore A): 20
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT-8130T
  • Appearance: Translucent
  • Processability: 200-200
  • Hardness (Shore A): 30
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 7
  • Elongation (%): 850
  • Tear strength (K N/m): 15
  • Model: HT-8140T
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 750
  • Tear strength (K N/m): 20
  • Model: HT-8150T
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT8160T
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 7
  • Elongation (%): 550
  • Tear strength (K N/m): 15
  • Model: HT8160T
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 450
  • Tear strength (K N/m): 15
  • Model: HT-8180T
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 300
  • Tear strength (K N/m): 15
  • Model: HT-8190T
  • Appearance: Translucent
  • Processability: 260-290
  • Hardness (Shore A): 90
  • Density (g/cm3): 1.22
  • Tensile strength (Mpa): 7
  • Elongation (%): 200
  • Tear strength (K N/m): 15
Other Products