LSR for Miscellaneous Parts (Pouring)

LSR for Miscellaneous Parts (Pouring)
Inquiry
Applications

This liquid silicone rubber (LSR) is typically used in pouring process for making silicone smartwears, watch bands, protective face masks and miscellaneous pieces.

Features
  • Rapid vulcanization, good dimensional stability and processability;
  • Non-toxic and safe, food grade;
  • High tear strength, non-yellowing;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.

Test

Rheometer test, 120℃, 5min

Technical Data
  • Model: HT-D3200A/B
  • Appearance: Translucent
  • Viscosity: 5K-1W
  • Hardness (Shore A): 20
  • Density (g/cm3): 1.06
  • Tensile strength (Mpa): 4
  • Elongation (%): 700
  • Tear strength (K N/m): 10
  • Model: HT-D3300A/B
  • Appearance: Translucent
  • Viscosity: 5K-1W
  • Hardness (Shore A): 30
  • Density (g/cm3): 1.08
  • Tensile strength (Mpa): 5
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT-D3400A/B
  • Appearance: Translucent
  • Viscosity: 5K-1W
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.09
  • Tensile strength (Mpa): 6
  • Elongation (%): 650
  • Tear strength (K N/m): 20
  • Model: HT-D3500A/B
  • Appearance: Translucent
  • Viscosity: 1W-2W
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.1
  • Tensile strength (Mpa): 7
  • Elongation (%): 550
  • Tear strength (K N/m): 20
  • Model: HT-D3600A/B
  • Appearance: Translucent
  • Viscosity: 1W-2W
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.1
  • Tensile strength (Mpa): 7
  • Elongation (%): 450
  • Tear strength (K N/m): 20
  • Model: HT-D3700A/B
  • Appearance: Translucent
  • Viscosity: 1W-2W
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 320
  • Tear strength (K N/m): 20
  • Model: HT-D3800A/B
  • Appearance: Translucent
  • Viscosity: 2W-3W
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 5
  • Elongation (%): 260
  • Tear strength (K N/m): 8
Other Products