Silicone Rubber for LED Extrusion

Silicone Rubber for LED Extrusion
Inquiry
Applications

This silicone rubber is mainly used for the extrusion of LED neon strips, flexible light strips, LED ribbons, etc.

Features
  • Fast extrusion;
  • High tensile strength;
  • Good processability;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.

Test

Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa

Technical Data
  • Model: HT-8545S
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 600
  • Tear strength (K N/m): 15
  • Model: HT-8555S
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 500
  • Tear strength (K N/m): 15
  • Model: HT-8565S
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 7
  • Elongation (%): 400
  • Tear strength (K N/m): 15
  • Model: HT-8575S
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 300
  • Tear strength (K N/m): 15
  • Model: HT-8585S
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 200
  • Tear strength (K N/m): 15
Other Products