High Transparent Fumed LSR (Pouring)
Inquiry
Applications
This liquid silicone rubber (LSR) is typically used in pouring process for making silicone rubber moulds and miscellaneous pieces that require high transparency.
Features
- Rapid vulcanization, good dimensional stability and processability;
- Non-toxic and safe, food grade;
- High tear strength, non-yellowing, easy de-molding;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, Dimethyl Cyclosiloxane, etc.
Test
Rheometer test, 120℃, 5min
Technical Data
- Model: HT-D9200A/B
- Appearance: Translucent
- Viscosity: 5K-1W
- Hardness (Shore A): 20
- Density (g/cm3): 1.06
- Tensile strength (Mpa): 6
- Elongation (%): 700
- Tear strength (K N/m): 15
- Model: HT-D9300A/B
- Appearance: Translucent
- Viscosity: 5K-1W
- Hardness (Shore A): 30
- Density (g/cm3): 1.08
- Tensile strength (Mpa): 6
- Elongation (%): 700
- Tear strength (K N/m): 15
- Model: HT-D9400A/B
- Appearance: Translucent
- Viscosity: 5K-1W
- Hardness (Shore A): 40
- Density (g/cm3): 1.1
- Tensile strength (Mpa): 8
- Elongation (%): 650
- Tear strength (K N/m): 20
- Model: HT-D9500A/B
- Appearance: Translucent
- Viscosity: 1W-2W
- Hardness (Shore A): 50
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 10
- Elongation (%): 600
- Tear strength (K N/m): 30
- Model: HT-D9600A/B
- Appearance: Translucent
- Viscosity: 1W-2W
- Hardness (Shore A): 60
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 10
- Elongation (%): 450
- Tear strength (K N/m): 30
- Model: HT-D9700A/B
- Appearance: Translucent
- Viscosity: 2W-3W
- Hardness (Shore A): 70
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 8
- Elongation (%): 400
- Tear strength (K N/m): 25
- Model: HT-D9800A/B
- Appearance: Translucent
- Viscosity: 2W-3W
- Hardness (Shore A): 80
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 260
- Tear strength (K N/m): 15