• 
Dongguan Zhengtai Organic Silicon Technology Co., Ltd.
  • Home
  • About Us
  • Products+
    • General Precipitated Silicone Rubber for Molding
    • High Resilience Precipitated Silicone Rubber for Molding
    • Non-Post Cure Silicone Rubber
    • Fumed Silicone Rubber
    • General Silicone Rubber for Extrusion
    • Silicone Rubber for Special Purpose
    • Fumed Liquid Silicone Rubber
    • Precipitated Liquid Silicone Rubber
  • Applications+
    • Industrial
    • Healthcare
    • Automotive
    • Daily Supplies
  • Contact Us
  • Home
  • Review
  • Platinum Cured Silicone Rubber

Platinum Cured Silicone Rubber

This product has been discontinued and removed from our shelves.

Platinum Cured Silicone Rubber
Inquiry
Applications

Our platinum cured silicone rubber is suitable for manufacturing of O-rings, washers, gaskets, etc.

Features
  • Rapid vulcanization;
  • Easy de-molding;
  • Non-yellowing;
  • Good resilience;
  • Suitable for mechanical edge finishing;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.

Test

Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa

Technical Data
  • Model: HT-8130
  • Appearance: Translucent
  • Processability: 200-200
  • Hardness (Shore A): 30
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 7
  • Elongation (%): 850
  • Tear strength (K N/m): 15
  • Model: HT-8140
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 750
  • Tear strength (K N/m): 20
  • Model: HT-8150
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 7
  • Elongation (%): 650
  • Tear strength (K N/m): 15
  • Model: HT8160
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 7
  • Elongation (%): 550
  • Tear strength (K N/m): 15
  • Model: HT-8170
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 450
  • Tear strength (K N/m): 15
  • Model: HT-8180
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 7
  • Elongation (%): 300
  • Tear strength (K N/m): 15
  • Model: HT-8190
  • Appearance: Translucent
  • Processability: 260-290
  • Hardness (Shore A): 90
  • Density (g/cm3): 1.22
  • Tensile strength (Mpa): 7
  • Elongation (%): 200
  • Tear strength (K N/m): 15
Tags
Platinum cured silicone rubber room temperature-curing silicones mold materials
Products
  • General Precipitated Silicone Rubber for Molding
  • High Resilience Precipitated Silicone Rubber for Molding
  • Non-Post Cure Silicone Rubber
  • Fumed Silicone Rubber
  • General Silicone Rubber for Extrusion
  • Silicone Rubber for Special Purpose
  • Fumed Liquid Silicone Rubber
  • Precipitated Liquid Silicone Rubber
Inquiry

You can contact us for a quotation or with any questions you may have on this product.

Click here
Products
  • General Precipitated Silicone Rubber for Molding
  • High Resilience Precipitated Silicone Rubber for Molding
  • Non-Post Cure Silicone Rubber
  • Fumed Silicone Rubber
  • General Silicone Rubber for Extrusion
  • Silicone Rubber for Special Purpose
  • Fumed Liquid Silicone Rubber
  • Precipitated Liquid Silicone Rubber
Contact
No. 3, Nanmen Avenue, Nanmen Industrial Zone, Qiaoli Village, Changping Town, Dongguan City
Ms. Liu
<
Send an Inquiry

You can contact us for a quotation or with any questions you may have on this product.

Click here
Review
Supported by ETW International Inc. USA